Відео

No

What do you need and why do you need them ?

This video is a bit outdated - nowadays the size parameter will be automatically exposed. You can create a parameter for this - this would be an Int In in attribute flow. Please watch this video explaining how attribute flow works: ua-cam.com/video/OFZ3Gl48sv4/v-deo.html

It's in the works right now.

Resolume is focused on live performance. There is no timeline/dopesheet editing.

@@ResolumeVJSoftware Right, but if I were to produce the footage in Blender then trigger the clips in Arena via Ableton, could I then export the result as a video file?

@@mysteriousstranger9496 Assuming that you are rendering in Blender - Yes. Arena can't read Blender files of course. For the best experiences: convert your Blender Renders to the DXV codec using Resolume Alley (a free conversion tool that comes bundled with Arena and Avenue).

This feature (and much more column magic) is in internal-testing right now. So we won't have to wait long until will can claim that promised kingdom of yours 👑

@@ResolumeVJSoftware That is fantastic news!! Can't wait! :)

Wire does not have layers. But in Arena/Avenue you can use the record panel. In the "After Recording" panel you can set it to empty clip.

@@ResolumeVJSoftware THX man this is right answer what I need :-)

@@ResolumeVJSoftware but now I have another problem, when I create a new composition with a resolution of 720x960, the Grid effect shows me only vertical lines, in order to get horizontal lines, it must be the first in line at the highest position in the Clip tab, and even Transform must be below it... . for example. it works normally at 1920x1080 resolution

@@facayudane2375 Oh no ! I think you just found a bug in our Software. 😱 So here's what we can do: 1) I'll report this to the developers so they can fix it. 2) You tell me which version of Resolume you are on and I'll make you a custom source or effect that fixes the problem. Please describe to me what you want to make so I can make exactly what you need.

@@ResolumeVJSoftware I use Arena 7.20.1 , I still experimented and realized that the Grid effect does not have to be the first of all effects, but it is only important that the Transform is below the Grid effect and only then will I get vertical and horizontal lines in the Grid effect, .... when the width of the resolution is smaller than the height, e.g. (600x800) then only shows vertical lines I posted the video here on my channel so you can see exactly what's going on

Thank you very much. You mean the post-processing as a theme? What would you like to see/learn? I'd love to do another Q&A video based on your questions. The Gradient Palette node has been retired in 7.20.1 You can learn about this in our recent Color Type video: ua-cam.com/video/I-tSsWcwHxo/v-deo.html Long story short: Because we introduced the color type the Linear node can now do exactly the same as the Gradient Palette node. So we removed the Gradient Palette node as the Linear is a more flexible tool. Resolume Wire is still in full development so you might find older tutorials using outdated nodes. I hope this helps you out and let me know if you have any questions

​@@ResolumeVJSoftware I was talking about the end of the video when you were done with 2d Mesh. You then used a camera, Bloom, Feedback Delay (which I have a hard time getting to work) and suggested some other effect node ideas/ I have a hard time getting things to work at the end (before output texture). I'm new with wire but getting better with the help of these videos. Oh yeah I'd like to see how you can get more (depth) between different elements with drop shadow or blur. Thank You, Jim

@@rubberbulletstudio4242 Sounds good to me Jim - I'll make a video for you this week exploring some post processing ideas. (eg. what part of the feedback delay causes you issues) - feel free to share them here and I'll pick them up for the video. I think I'll get around doing it on wednesday.

Have a look at the example patches - link in the video description

We are working on an update for the Wire that will allow you to dynamically load files. This will open up te door to stinger-style transitions. I'll keep this use case in mind for sure!

The patch can be found here : resolume.com/forum/viewtopic.php?p=94964#p94964

@@ResolumeVJSoftware ❤️Cool, I take this as approval of my request for use in my next pulished Pluginserie. In this sens, thanks very much and have a great weekend, Mark & ResolumeB.V. With just the best wishes & greetings bennoH. + 🐹&🐹

@@bennoH.-cr9gu They are free for anybody to use. So yes, you can add them to your plug-in, but so can anybody.

​@@ResolumeVJSoftware❤️ Yes thanks🙏, but I don't have the 7.20 and the last time I was able to update was in Nov. 2023. But as far as I can see it, according to the video, i.e. the patch shown at 4' 20" in the TutoVid, this cylindrical wave that gives a 3D visual impression. I have put all the nodes together as they are in the Vid and adopted the settings/values ​​of the nuds, but I only get a transparent output. But no nuds are used that are not present in my Wire version, so I'm a bit confused now. Maybe it has something to do with the Instances. Can you please try to help me again, dear Mark? I was followed your advice & download the patch in the forum, but just because I don't have 7.20 i think it will only show errors later for me, so I didn't even load it into Wire to avoid serious crashes or some bad hapenings. 🌀& By the way, I always adapt such templates heavily so that the original only forms the basis and is therefore not very easy to recreate for others, and I never publish Wire Patches, only compiled Arena/Avenue plugins so it mast be more a wonder that others recreat it from my adaptations, this to as a protection for myself from horoscopes, such as taking off and not getting injured in this area of copirighthapenings. So this cylindrical 3D-Wave and only that is of interest to me at the moment. You can also send me an email, Christoph knows my email because I often get support from him, just say's "Benno or bennoH. from Switzerland". 🙏🙏👏So thank you very much for your final approval of use and the support up to this point, Mark, with just the best wishes & greetings bennoH.🐼🙋

​@@ResolumeVJSoftwareI tried again with the patch mentioned, i.e. this cylindrical wave, and found a solution by my self. My result is now quite different thing, but it is to a 3D waveobject or a kind of mixture between a knot and a hyperbola and since I have always found the Gordian knot or hyperbolas interesting, I am very happy with my result, which I then up supplemented with various other nodes & functions in order to generate a clear distinction and separation from the base. So thank you again 🙏 and that seems to be that it's now for you are relieved of the burden again, but maybe I will turn to you again another time Mark🌀, 😄so have a good time and stay fit and happy. With just the best greetings from Switzerland at a mounten place by bennoH.🐼🙋

please contact support at mail @ resolume . com

Release notes and patches are added to the video description

It is replaced by the Int In node. For Colors use Color In. In the node panel you can set the amount of choices etc. The new system is more flexible and gives you additional options.

Try the high quality setting in edge detection node. You can ofc always use a bit of blur to smooth the result

@@ResolumeVJSoftware thanks for the reply! have tried a few workarounds :) also is there a way to change the distance so it doesnt spread from the centre of the composition, it behaves very strangely on anything thats not perfectly centred?, can upload a video if you need.

ua-cam.com/users/shortsjwUwoQjPvFE?si=CPf4TRjPgZlFq1KR

@@matik__1 It would be easiest if you would post a question on our forum or slack (links to these can be found on our website). It is really hard to help people via UA-cam comments as we can't share patches/images.

I need a little bit more info to help you out - what's going wrong?

Also keep in mind that these tutorials are quite outdated - For example: the Choice In and Pack nodes don't exist anymore.

@@ResolumeVJSoftware My troubles are on the effect example. I can never get to properly match up with your example, I feel like the rhombus doesn't properly match up, when I switch the union node to "stairs" the blocks are very different. Overall my effect image comes out wonky

We'll release Resolume 7.20 soon. This release will have a complete overhaul of all our tutorials, making it much easier to learn. We'll update our video tutorials too, as they are getting outdated fast with all the new content!

also shredder is not shredding in arena but bending (looks quite cool tho) and in wire works as intended

Make sure the category in Wire is set correctly

@@ResolumeVJSoftware yes sir I set it as "effect" , followed your video but I cound find it in arena.

@@user-zg3dz7uk4y is the patch saved in documents/resolume wire ?

Older releases can be found on our website: resolume.com/download/ But this is an old video, we arre currently at Resolume 7.19.2 with 7.20 lurking around the corner.

You can animate in many different ways in Wire. For example: using a Saw oscillator, which will "loop".

thank you. The question I have is how to create loop visuals that start and end in the same way so that no cuts are seen when the loop repeats. @@ResolumeVJSoftware

@@symbiothika That is a hard question to answer because there are 100 different ways of doing that. Can you explain a little bit more about the context. What are you trying to make?

In the example of turbulence substance I want to make that visual a loop to use in Resolume, but that no cuts are noticeable, that is, it starts where it ends. Also in your Game Boy example@@ResolumeVJSoftware

@@symbiothika The Turbulent Substance Patch is based on Fractal Noise - So in order for it to loop you need to make sure that the phase offfset is the same at the start and the end of your loop. This will be a bit tricky because the noise is random. I'm not sure what the problem is with the gameboy patch, that one loops right?

Hey @funkjoy , we just did a little test on our latest release and it worked just fine. Could you contact us at mail@resolume.com with your problem + screenshots of what you are doing. The customer support there can help you out.